Most buyers start with a price list and a catalogue. That is the wrong end of the process. A tactical bag is a load-bearing structure, and the factory's ability to control stitching, webbing and hardware is what determines whether the fifth reorder matches the first. These are the questions worth asking before you send a deposit.

1. Do they cut and sew in-house, or broker the order?

Ask for a video call from the cutting table and the sewing floor, not a showroom tour. A factory that cuts its own panels controls the pattern, the material yield and the delivery date. A trading company controls none of the three. If the answer is "our partner factory", ask to visit the partner and confirm who signs the inspection report.

2. Can they execute the MOLLE layout you need?

MOLLE is not decorative stitching. PALS rows must sit on a consistent 25 mm grid with 38 mm spacing, bar-tacks at the row ends, and enough stiffness in the backing panel that pouches do not sag when loaded. Ask for a close-up photo of a bar-tack and a measurement of the row spacing on a production unit, not a sample.

3. Where does the hardware come from?

Buckles, zips and adjusters are the first things to fail in the field. A serious factory can name the hardware supplier and the grade: YKK® #10 for main zips, Duraflex® or UTX® for high-cycle buckles, and a stated pull strength for the webbing loops. If the answer is "good quality, no problem", keep looking.

4. What is the real MOQ and how is it calculated?

MOQ should be quoted per style, per colour. Be cautious when a supplier quotes one number for everything — it usually means stock goods with your label sewn on. For custom shells and colours, 300 pieces per colour is a common minimum because of fabric dye-lot and cutting setup. Ask whether the MOQ changes if you accept a stock colourway.

5. How do they inspect, and who signs off?

AQL 2.5 is the baseline for soft goods. Ask for the inspection sheet: dimensions, stitch density, hardware function, zip cycling and a needle-detection record. The person who signs the report should be on the factory payroll, not the trading company's sales team.

6. What does the sample actually prove?

A sample proves the pattern, not the production line. Before approving bulk, ask for a pre-production sample made from the actual bulk fabric and hardware, and compare it to the approved sample side by side. Check the base panel, the strap anchors and the zip ends — the three places where cost-cutting shows up first.

7. Can they support the reorder?

The second order is the real test. Ask how long the pattern and construction sheet are kept, whether the hardware batch is recorded, and what happens if the fabric dye lot changes. A factory that keeps a construction file can reproduce the style two years later; one that works from photos cannot.

Red flags worth walking away from

  • Prices far below the material cost of the shell and hardware you specified.
  • No measurement report, only photos of the finished sample.
  • Unwillingness to name the shell mill or hardware brand.
  • A sample that arrives with a different shell weight or buckle than quoted.
  • Lead times that ignore Chinese New Year and peak-season capacity.

Tactical Bag Factory cuts and sews in Guangzhou, quotes MOQ per colour, and sends a measured sample with hardware details before bulk. If you are comparing suppliers, send the same reference sample to each and compare the construction, not just the price.